Gliss Walk-In is a system of walk-in closets allowing to design made to measure compositions, with both linear and corner solutions. Compositions can be wall-mounted with or without back panels. The equipment can be freely positioned in height, thanks to a system of concealed, self-locking brackets. A simple design and the wide customisation of the equipment allow solutions for any need.
USE AND MAINTENANCE
The product was designed for use in the home. Wall mounting procedures for the walk-in closet must be carried out only after the buyer has verified the resistance level of the materials that make up the wall; shelves have a maximum load bearing capacity of 25Kg per linear metre, with load distributed uniformly; do not climb, sit or hang on the shelves; the invisible metal drawer runners have automatic return and a safety catch to prevent them falling out. Do not climb or hang on drawers. Lacquered parts may leave colour on the cloth. This is not a defect and disappears once the paint that has been deposited on the surface during the drying phase of the painting process has been eliminated. Avoid impacts of all kinds against parts in plate glass. Avoid doing maintenance on components of the product yourself, contacting your retailer if anything goes wrong. Keep tops away from coming into contact with water or other liquids, even for brief periods of time. Borders should not be placed in the vicinity of sources of heat over 45°C. Any odours given off by the product, when unpacked, do not constitute a source of danger and disappear when it is exposed to airy surroundings.
MAINTENANCE OF MELAMINE FACED, LACQUERED, WOOD AND GLASS PARTS
For everyday maintenance dust with a soft dry cloth. For greasy, oily marks (fingerprints) we advise cleaning the surface with alcohol diluted in water, drying immediately with a soft cloth. For glass, specific products readily available on the market can be used. Products containing acetone, bleach and solvents should be avoided, as should abrasive products, furniture wax and hard fibre cloths (linen and synthetics) which could ruin and/ or scratch surfaces. All these operations should be carried out with great care, avoiding heavy pressure. Exposure to direct sunlight can alter the paint or wood colour.
ECO SKIN MAINTENANCE (FOR DRAWER ACCESSORIES AND HANDLES)
Use a soft damp cloth, preferably microfibre, to remove dust and then dry with a soft cloth. For more stubborn marks, use Marseille soap and a soft damp cloth. The rinse and dry everything. Do not use aggressive, bleach or solvent based products, as these can cause irreparable damage to the eco-leather. Do not put near heat sources above 30°.
Once discarded, neither the product nor its components should be dispersed in the environment, but rather consigned to public disposal systems.