USE AND MAINTENANCE
The product is designed for domestic use to support lightweight material; the table tops are not to be used in any way as work benches; do not climb up or sit on the table; distribute weights on the extensions in a uniform manner; avoid maintenance work on table components and always contact your dealer for any problem; do not allow surfaces to come into contact with water or other liquids, even for brief periods; the edges should not be placed near sources of heat above 45°C; any smells the product gives off as soon as it is unwrapped are not dangerous and disappear with exposure to a ventilated area.
The table can be extended on one or both sides. To open and close the table without damaging it, follow the steps in the “assembly instructions”.
MAINTENANCE OF WOODEN AND GLASS PARTS
For everyday maintenance dust with a soft dry cloth. For greasy, oily marks (fingerprints) we advise cleaning the surface with alcohol diluted in water, drying immediately with a soft cloth. For glass, specific products readily available on the market can be used. Products containing acetone, bleach and solvents should be avoided, as should abrasive products, furniture wax and hard fibre cloths (linen and synthetics) which could ruin and/ or scratch surfaces. All these operations should be carried out with great care, avoiding heavy pressure. Exposure to direct sunlight can alter the wood colour.
MAINTENANCE OF ALUMINIUM PARTS
In order to maintain the aesthetic characteristics of these finishes over time and avoid rust, regular, methodical and meticulous cleaning is necessary. For everyday maintenance, dust with a soft dry cloth. For greasy oily marks (fingerprints) we advise cleaning the surfaces with normal liquid detergents for glass. Products containing solvents and/or alcohol and hard fibre cloths (linen and synthetics) should be avoided, as they could ruin and/ or scratch surfaces. Treat polished aluminium and chromed metal finishes monthly with specific products for cleaning/polishing metals.
MAINTENANCE OF MARBLE TOP
As regards normal maintenance, dust and dry residues, use a soft cloth. For stubborn dry dirt (dust which has penetrated into the porosity of the granite) it is advisable to use a close-knitted or a spongy cloth, slightly dampened with warm water and well wrung out. Clean by following the vein of the surface without applying too much pressure. As for both greasy and oily marks (fingerprints) it is recommended to treat the surfaces with a small sponge dampened with water and washing-up liquid. Afterwards go over the surfaces once again as described above. Products which contain solvents and/or methylated spirits as well as cloths with rigid fibres (linen and synthetic fibres) are to be avoided as these may ruin the varnish. Given the kind of treatment it is important to immediately remove stains following the above described procedures.